Simple Discussion

Simple Discussion

Simple Discussion

Number of replies: 28
Q1: What are the steps of designing a limbed systems?
In reply to First post

Re: Simple Discussion

by Ariful Hasan Dip -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to Ariful Hasan Dip

Re: Simple Discussion

by Sha. Istiauqe Ahammed 171-15-8671 -

1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Md Limon Hossain -
1. Identify the problem
2. Research the problem
3. Generate possible solutions
4. Select the best solution
5. Sketch the design
6. Build prototype model
7. Test the model
8. Refine and retest the model
9. Communicate the final solution.
In reply to First post

Re: Simple Discussion

by Yeamin Mahmud -
1. identify a problem
2. research the problem
3. generate possible solutions 
4. select the best solution 
5. create a model
6. test the model
7. refine and retest the model as needed 
8. communicate the final solution.
In reply to First post

Re: Simple Discussion

by Shawon Talukder -
1) Identify the problem,
2) Research the problem,
3) Generate possible solutions,
4) Select the best solution,
5) Create a model,
6) Test the model,
7) Refine and retest the model (if needed),
And
8) Communicate the final solution.
In reply to First post

Re: Simple Discussion

by Syed Rakib Al Hussain -
1) Identify the problem,
2) Research the problem,
3) Generate possible solutions,
4) Select the best solution,
5) Create a model,
6) Test the model,
7) Refine and retest the model.
In reply to First post

Re: Simple Discussion

by ASFI Hossain -
these are:
1 .sketch the design
2 .build a smaller prototype
3 .design the model with details
4 .look for flaws
5 .build the model
6 .test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Abdul Gani Ibna Awal Shayket -
1. identify a problem
2. research the problem
3. generate possible solutions
4. select the best solution
5. create a model
6. test the model
7. refine and retest the model as needed
8. communicate the final solution.
In reply to First post

Re: Simple Discussion

by shamsul arefin Rabby -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Rabby Rayhan -
A lambed system is a mobile robot with a body, legs, and arms.
make a limbed system robot:
1. Define the problem and Identify the Objective
2. Research and Brainstorm
3. Build a Prototype
4. Build a robot
5. Test a robot
6. Go to step one and restart
7. Communicate the final solution
In reply to First post

Re: Simple Discussion

by Md. Sharifuzzaman -
1. Define the problem and Identify the Objective
2. Research and Brainstorm
3. Build a Prototype
4. Build a robot
5. Test a robot
6. Go to step one and restart
7. Communicate the final solution
In reply to First post

Re: Simple Discussion

by alamin alamin8740 -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Sadia Jaman 181-15-10710 -
1 Find the problem
2 sketch the design
3 build a smaller prototype
4 design the model with details
5 look for flaws
6 build the model
7 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by fahim shuvo -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Abdul Gani Ibna Awal Shayket -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Atiq Ullah Ador -
Steps of the technological design process include: identify a problem, research the problem, generate possible solutions, select the best solution, create a model, test the model, refine and retest the model as needed, and communicate the final solution.
In reply to First post

Re: Simple Discussion

by shahadat hossain -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Rakibul Hasan -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Md. Sohan Hossain -
Steps of designing a limbed system:
#Identify a problem
#Research the problem
# Generate possible solutions
# Select the best solution
# Create a model
# Test the model
# Refine and retest the model as needed
Communicate the final solution.
In reply to First post

Re: Simple Discussion

by Md Kausaruzzaman 172-15-10142 -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by SHOHANUR RAHMAN -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by shazid karim -
1. identify a problem
2. research the problem
3. generate possible solutions
4. select the best solution
5. create a model
6. test the model
7. refine and retest the model as needed
8. communicate the final solution.
In reply to First post

Re: Simple Discussion

by MD.Golam Mahbub -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Sanzida Islam -
1 Find the problem
2 sketch the design
3 build a smaller prototype
4 design the model with details
5 look for flaws
6 build the model
7 test till it's running perfectly
In reply to First post

Re: Simple Discussion

by Nahid Hasan Sojeeb -
i. sketch the design
ii. build the model
iii. look for flaws
iv. design the model with details 
v. build a smaller prototype
In reply to First post

Re: Simple Discussion

by tamim tanta -
1)sketch the design
2) Identify the problem,
3) Research the problem,
4) Generate possible solutions,
5) Select the best solution,
6) Create a model,
7) Test the model,
8) Refine and retest the model (if needed),
And
9) Communicate the final solution.
In reply to First post

Re: Simple Discussion

by Sakib Ahmad -
1 sketch the design
2 build a smaller prototype
3 design the model with details
4 look for flaws
5 build the model
6 test till it's running perfectly